text.skipToContent text.skipToNavigation

Multidraw ST WM

Art-Nr.: 30270
  • water-miscible cooling lubricant
  • based on fully synthetic additive components and base oils
  • free of mineral oil

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

Product Details

Characteristics

Colour / Appearance clear, slightly yellowish
Density/15°C / DIN EN ISO 12185 1090 kg/m³
Viscosity/40°C / ASTM D 7042 401 mm²/s
pH-value (10 % in distilled H2O) / DIN 51 369 9.7
Conductivity (10 % distilled H2O) 220 µS/cm
Correction factor for determination of the concentration - refractometer 1.1

Multidraw ST WM  is a water-miscible drawing lubricant for the production of high-strength stainless steel wires in the intermediate and fine drawing (inlet diameter approx. 2 mm), e.g. for the medical technology. The product is characterized by a high lifetime of the drawing dies as well as very clean wire surfaces.

Multidraw ST WM is also perfectly suitable for chipless forming operations of e. g. high-alloy steel and stainless steel.

 

Depending on the application up to 100 %.

We recommend de-mineralised water for the preparation of the emulsion. Please mix the concentrate
with a thin and steady stream into water.

Due to its high viscosity it is not recommended to use Multidraw ST WM in automatic mixing devices.

placeholder