text.skipToContent text.skipToNavigation

Zubora 67 M Plus

Art-Nr.: 31610
  • semi-synthetic, water-miscible high performance cooling lubricant
  • free of boron
  • on the basis of mineral oil
  • universally applicable
  • long-term stable
  • excellent corrosion protection
  • free of formaldehyde releasers
  • plastic compatibility in accordance with VDI 3035
Due to the use of primary amines there is no risk of formation of nitrosamines according to
the current state of knowledge.

Furthermore, Zubora 67 M Plus is inhibited against the formation of nitrosamines, i.e. that
even if there are any secondary amines and nitrites (e. g. through foreign carry-over) no stable
N-nitrosamines can be formed. When exceeding the limit value for nitrite according to TRGS 611
a partial or complete change of the emulsion is not necessary.

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

Product Details

Characteristics

Density/20°C / DIN EN ISO 12185 980 kg/m³
Viscosity/20°C / ASTM D 7042 140 mm²/s
pH-value (5 % in H2O) / DIN 51 369 9.5 (after 4 to 5 days: 9.1 - 9.3)
Cast iron chips test (1:20) / DIN 51 360/T2 Corrosion degree 0
Mineral oil content 30 %
Water hazard class, concentrate 2
Water hazard class, emulsion (
Correction factor for determination of the concentration - refractometer 1.3

Zubora 67 M Plus can be used for cutting operations up to medium difficulty. Furthermore, it is
well suited for grinding. The product can be used for machining steel, cast iron and aluminium.

Due to a special formulation Zubora 67 M Plus is particularly long-term stable. The innovative
additive package effects a longer tool life and enables the working with high cutting speeds.
This advantage guarantees high flexibility for different cutting processes mainly in central systems
and working centres.

The necessary working concentration depends on the difficulty of the operation and the material.

Recommended hardness of the preparation water:

8 to 12° dH (140 - 210 ppm CaCO3).

Grinding          4 - 5 %
Metal cutting    5 - 7 %

placeholder