text.skipToContent text.skipToNavigation

Multidraw ALS 40

Art-Nr.: 20870
  • non water-miscible, fully synthetic drawing oil
  • with high content of synthetic greasing agents
  • contains EP additives and anti-aging inhibitors
  • with anti-corrosion additives
  • good compatibility with different lacquer systems of the cathodic immersion painting

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

Product Details

Characteristics

Colour / DIN ISO 2049 lighter 4.0
Density/15°C / DIN EN ISO 12185 910 kg/m³
Viscosity/40°C / ASTM D 7042 420 mm²/s
Flash point (Cleveland) / DIN ISO 2592 > 175 °C

Multidraw ALS 40 can be very well used for chipless forming of aluminium as well as steel and
zinc coated steel grades with the highest demands on drawing performance.

The product is not suitable for non-ferrous heavy metals.

Due to its high ageing stability Multidraw ALS 40 does not become gummy and shows very good corrosion protection on steel and zinc coated steel qualities also after long intermediate storage periods.

Multidraw ALS 40 can be applied manually as well as by automatic spraying or rolling systems.

Due to its synthetic base Multidraw ALS 40 shows good compatibility during welding. Therefore, separate degreasing before welding can often be avoided.

placeholder