text.skipToContent text.skipToNavigation

Zubora 67 M Extra

Art-Nr.: 31620
  • semi-synthetic, water-miscible high performance cooling lubricant
  • free of boron
  • on the basis of mineral oil
  • with high content of polar additives
  • long-term stable
  • excellent corrosion protection
  • free of formaldehyde releasers
  • plastic compatibility in accordance with VDI 3035

Due to the use of primary amines there is no risk of formation of nitrosamines according to the current
state of knowledge.

Furthermore, Zubora 67 M Extra is inhibited against the formation of nitrosamines, i.e. that even if there
are any secondary amines and nitrites (e. g. through foreign carry-over) no stableN-nitrosamines can
be formed. Therefore, when exceeding the limit value for nitrite according to TRGS 611 a partial or complete change of the emulsion is not necessary.

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

product.classification.details

Characteristics

Density/20°C / DIN EN ISO 12185 970 kg/m³
Viscosity/20°C / ASTM D 7042 150 mm²/s
Mineral oil content 30 %
Water hazard class, concentrate 1

Due to selected highly effective additives Zubora 67 M Extra is suitable for cutting processes of most
difficult demand. The product can be used for machining steel, cast iron and aluminium.

Due to a special formulation Zubora 67 M Extra is particularly long-term stable. The innovative additive package effects a longer tool life and enables the working with high cutting speeds. Thus, a high process security can be guaranteed even for very difficult working operations.

Furthermore, Zubora 67 M Extra is well suited for difficult cutting operations with small diameter (5 mm).
This advantage guarantees high flexibility for different cutting processes mainly in central systems and working centres.

The necessary working concentration depends on the difficulty of the operation and the material.

Recommended hardness of the preparation water:

8 to 12° dH (140 - 210 ppm CaCO3).

drilling/milling etc.       approx.   5 %
reaming/sawing etc.    approx. 10 %

placeholder