Multidraw PL 61 SE
Art-Nr.: 26400- non water-miscible, thixotrope prelubricant
- with synthetic greasing agents
- contains ageing and corrosion inhibitors as well as EP additives
- excellent anti-corrosion properties
- very good drawing characteristics which often make additional lubrication before
the forming process unnecessary - good compatibility with different lacquer systems of the cathodic immersion painting
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
product.classification.details
| Density/15°C / DIN EN ISO 12185 | 900 kg/m³ |
| Viscosity/40°C / ASTM D 7042 | 100 mm²/s |
Multidraw PL 61 SE is mainly used in rolling mills. The product shows excellent compatibility with all uncoated
and coated thin sheet surfaces. The excellent corrosion protection guarantees an optimum conservation of
the semi-finished products during storage and transport even under extreme climatic conditions.
Multidraw PL 61 SE is characterized by its low friction coefficients and easy removability as well as by an optimum inhibition against draining off.
Due to its composition Multidraw PL 61 SE is perfectly suitable for chipless forming operations such as
stretch-forming and ironing.
The high pressure absorption capacity guarantees best protection of the tools and metal sheets.
Due to its excellent adhesive properties the product does not drain off even during long storage periods.
Standard application of Multidraw PL 61 SE is done electrostatically. Application by spraying, rolling or
dipping is also possible.
If applied electrostatically, we recommend heating up the product to 50 - 60 °C in the tank. In heated tanks Multidraw PL 61 SE should be constantly circulated in order to maintain a uniform temperature distribution.