Multical WP 50
Art-Nr.: 90201- mineral oil containing calibration oil
- on the basis of low-boiling hydrocarbons
- free of aromatics
- odour-neutral
- wax containing
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
product.classification.details
| Density/15°C / DIN EN ISO 12185 | 830 kg/m³ |
Multical WP 50 is a non water-miscible solvent and wax containing calibration oil which convinces due to
its high calibration performance. The contained solid lubricants give Multical WP 50 its excellent lubricating properties. Parts calibrated with Multical WP 50 increase the tool life of tools used during subsequent metal cutting processes considerably.
During a possible steam treatment of the parts there will be no coking residues or other negative influences
on the surface of the sintered parts, provided that the steam treatment furnace is adjusted properly.
We recommend applying Multical WP 50 by dipping. Spraying is also possible, however, only after making respective technical adaptions.
Remark: Before taking out the product from its packaging please stir well.
Corrosion protection:
After the calibration process Multical WP 50 leaves a grease-like film on the surface which provides extraordinary corrosion protection to the sintered parts.
Therefore, usually no special finishing treatment with corrosion protection oils is needed.
The highest performance level is achieved after the solvent evaporates. The remaining additives on
the work piece guarantee an excellent calibration performance.